How we work in Cabra: from first contact to installation
Commissioning a made-to-measure piece of furniture can feel daunting when you don't know what comes next. This page explains how to order a made-to-measure wardrobe in Cabra, following the real order in which we work: first an initial guide based on your photos and measurements, then the measuring visit, a fixed quote, your approval, manufacture, installation and a final check with you. At each step we tell you what you decide, which document passes to the next stage and what it helps to have ready.
- 01Ballpark price
- 02Measuring
- 03Design
- 04Final quote
- 05Approval
- 06Manufacture
- 07Installation
- 08Final check
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
The eight stages of your order
- 01By WhatsApp
Guide price
Send us photos of the space, approximate measurements, your address and what you need. We'll come back to you with a guide price, which will depend on the measuring visit.
- 02€50 if you don't order
Measuring visit
We agree a date to visit your home and study the space along with the access. In Cabra, the visit costs €50 if you don't go ahead with the work, and is free if you do.
- 03Depends on the project
Design and plans, if needed
We measure up, make the wardrobe, and set out in the proposal the terms we've agreed with you in Cabra.
- 04In writing
Final quote
Once the measurements are confirmed, in Cabra we put the interior layout, materials, hardware, installation and price into a detailed quote.
- 05Agreed deposit
Approval and deposit
Go through the proposal and, once you pay the agreed deposit, we get to work on your order.
- 06Between 2 and 3 weeks on average from the moment you pay the deposit
Manufacturing
We take care of making the furniture according to the project you've approved and of preparing it so that transport and installation in Cabra go perfectly.
- 07At your home
Installation
In Cabra you don't have to lift a finger: we bring the furniture to your home, fit it, and take care over the adjustment of doors, fronts and finishing touches.
- 08In writing
Walk-through with you
In Cabra we test every opening, inspect the finishes in detail and check that everything works; if any adjustment is still outstanding, we note it down in writing.
Stage 01
What we need for an initial assessment
- —First, we need to know what you have in mind: fitted wardrobe, sliding doors, walk-in wardrobe… or perhaps you've no idea yet
- —Neighbourhood or town
- —Rough measurements (width, depth and height), in cm
- —Photos of the empty area from the front and from the sides
- —Think about your belongings: hanging clothes, folded clothes, shoes and suitcases
- —If you've got an idea of the doors and finishes you'd like, bring it along
No drawing or exact measurements needed.
Stage 02
What we check when we come to measure
- —We check at several points how wide the space is from side to side and how high from floor to ceiling, to spot any uneven surfaces
- —Floor level and skirting board
- —Everything we come across: radiators, windows, beams, sockets and switches
- —A clear area in front of the wardrobe so the doors can open
- —We take into account the entrance hall, the stairs and the lift in the building so we can bring the pieces up without any problems
Stages 05–08
Approval and installation day
How approval works
If you're in Cabra, once we have the final measurements we finalise the interior, doors, materials and hardware, and the detailed quote makes everything clear. After you approve it and pay the deposit, the wardrobe goes into production.
What you prepare
The space needs to be empty and easy to get into, with the flooring laid and the walls finished. If a socket needs moving or a partition wall taken down, that work must be done beforehand.
What we do
We carry out the installation and adjustment of the wardrobe in Cabra, and go over it with you when we finish; anything left to be fine-tuned is given to you in writing. If you'd like us to take the old one away, we'll add it to the quote.
Photos and measurements for an initial steer
Everything starts, whether you live in the centre of Cabra or a neighbouring town, with what you can gather at home in ten minutes. Note down the approximate width, height and depth of the space, take three or four photos (front, ceiling and corners) and jot down what you want to store and what type of doors you prefer. You can do this with the configurator, which prepares a design and sends it to us, or simply write to us directly. With that information, our team gives you a guide price within 24 hours, at no cost. It is a starting point to help you decide whether you want to continue.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Checks we carry out when measuring your space in Cabra
In Cabra and the surrounding area, the measuring visit replaces approximate dimensions with real ones. The space is measured at several heights, we check that walls are plumb and look at ceilings and skirting boards, and we note any radiators, sockets and windows that affect the design. We also confirm the route the pieces will take to the room. This visit costs €50 if you don't go on to order the wardrobe and is free if you do. Afterwards, you have a list of confirmed measurements and outstanding decisions that serves as the basis for everything else.
Have you already measured the space?
We guide you from the very start: just message us on WhatsApp with a photo of the space and the dimensions you've estimated.
When a design project is essential and how to agree it
For a simple front, the initial guide and measurements are enough. For a walk-in wardrobe, a corner or a sloping ceiling, it is best to have a drawn-up project before manufacture. This drawing covers the module layout, the type of doors, the interior heights and the finishes, and we go over it with you until you see what you had in mind. If something doesn't fit, it is corrected on paper and not on the wall. What you approve at this point is what gets made.
What the final quote should include
With the confirmed measurements and the project, we draw up the fixed quote. It sets out what is being made (carcass, doors, interior), the materials and finishes, the hardware on each door, the installation work involved and what is not included. If an old unit has to be removed or a skirting board adapted, it is written down. If you want to compare it with another offer, first read what affects the price. The terms that apply to your order, including those for after-sales service, are set out in that same document.
Approval, changes and the agreed deposit
Once you are happy with the quote, you approve it and agree the deposit that starts manufacture. Until then you can ask for changes without affecting anything already cut. After that, any modification is assessed separately, because pieces are already in production. That is why we urge you to take your time reviewing the design, materials and layout before giving the go-ahead: it is the last point at which changing your mind is straightforward.

Ask us to come and measure up in Cabra
- 01Give us your name and the location of your home.
- 02We find out which day suits you best with a couple of lines on WhatsApp and note it down, with no further hassle.
- 03The measuring visit is charged at €50, and becomes free as soon as you order the wardrobe from us.
Made-to-measure manufacture and agreeing when we'll install everything
Manufacture takes two to three weeks on average from the moment the order is confirmed; installation is arranged separately, once the wardrobe is ready and both sides have a free date. In our notice we tell you when the pieces arrive and what needs to be ready in your home. In Cabra and the surrounding area, access often affects the arrival time, so the sooner you confirm stairs, lift and parking, the easier it is to fix the day.
Get your flat ready so the furniture can go in without any problems
Before installation, clear the space and the area around it, protect the floor if you wish and remove anything on the wall. Check that no work is still pending nearby, such as wet paint or skirting boards not yet fitted, as these may mean touch-ups are needed. If there is an old wardrobe, let us know so we can tell whether it needs to be dismantled. With the room clear, installation is quicker and the result is cleaner.
Final check of the work and how to report a defect
Once installation is finished, we check with you that the doors close and slide properly, that the drawers move without rubbing and that the finishes have no marks. If anything needs adjusting, it is noted there and then and we agree how to put it right. And if you spot something days later, you can write to us with photos and the project details; on the furniture care page we explain how to do this and how to keep your wardrobe in good condition.
Questions
Frequently asked questions from customers in Cabra when ordering a wardrobe
Behind the projects you see there are real people: pop in and see SI, ARMARIO.
If I decide to go ahead after the initial guide, have I fixed the price?
No, it is not the fixed price. It is a guide based on what you have sent us. The fixed quote is drawn up after we measure up at your home and confirm the materials and layout.
When do I need to decide on the board and the interior layout?
When you accept the final quote, once the measuring is done and the project has been reviewed. Before that point you are free to ask for adjustments.
Until when can a finish or an interior measurement be changed?
It depends on whether pieces have already been made. If not, we look at the change and update the quote; if they have already been cut, we assess separately what the change involves.
What do we check together once the wardrobe is installed?
Doors, drawers, runners, finishes and fixings. If anything is wrong, it is noted down and we agree how to fix it.
Shall we start with step one?
To take the first step in Cabra, all we need on WhatsApp is a photo and three measurements. If you take it with your phone, that's enough.

