Adjustments and care for your wardrobe in Cabra

A well-fitted made-to-measure wardrobe asks very little of you, but that little makes the difference between a unit that keeps closing smoothly and one that starts to rub after two years. Here we have gathered the care tips for made-to-measure wardrobes that are worth keeping in mind, how to let us know if something needs adjusting, and what information goes with your project. The specific terms of each order in Cabra are set out in writing in the quote you receive, and that is where you should check them.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

01

The paperwork that comes with your project

When you accept the quote and once the installation is finished, it is a good idea to keep the following together in one folder, printed or on your phone: the signed quote, the approved design with its measurements and finishes, and photos of the wardrobe just after it was fitted. Keep the project contact details there too. This small file settles almost any later question, because it shows what was made, from what material and when. The terms that apply to your order are stated in each written quote, not here in general terms.

White fitted wardrobe with plain doors and an open wooden interior in a bright bedroom in Cabra
02

How to report an adjustment that is needed

If a door rubs, a drawer doesn't run properly or a handle comes loose, write to us as soon as possible with a short description and your project details. The sooner you tell us, the easier it is to find the cause, which is sometimes just a simple readjustment of a hinge or the levelling. Tell us the room, the unit affected and how long it has been happening. There is no need to try to fix it yourself: forcing a runner or overtightening a fitting can complicate what would have been a few minutes' adjustment.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Who deals with each issue

If your wardrobe was fitted in Cabra or a nearby town, your first point of contact is the team you arranged the order with, by WhatsApp or by e-mail at [email protected]. From there the project is identified, what you describe is reviewed and you are told how to proceed: a simple adjustment, a visit or a question about the material. If the problem relates to a specific component, such as a runner or a hinge, the guidance of that fitting's manufacturer is taken into account, and we explain what to do in each case.

04

Care by finish and hardware

Lacquered or melamine board should be cleaned with a soft, slightly damp cloth and dried straight away; abrasives, scouring pads and products containing bleach or ammonia scratch the surface or dull the colour. Doors with glass or mirror panels respond well to glass cleaner applied to the cloth, never directly onto the edge. The sliding-door runners should be kept free of dust and fluff, and an occasional vacuum of the track prevents jamming. Hinges and soft-close mechanisms don't need oil unless the manufacturer says so. And avoid overloading shelves and hanging rails beyond what the design allows for, so they don't bend.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

Humidity, sun and daily use

Wood and boards suffer from sudden changes in humidity. In Cabra homes with courtyards or cold exterior walls, ventilate the room, don't leave the wardrobe against a source of condensation, and avoid putting damp items inside. If the sun falls directly on a door, the tone can change over time, so it helps to draw the curtains or use some protection during the strongest hours. In daily use, open and close the doors by hand, without pulling on one corner, and don't hang weight on the edges of the doors or on hinged doors when they are open.

Fitted wardrobe with white sliding doors and a light wooden interior in a bright bedroom in Cabra
Measuring visit

Ask us to come and measure up in Cabra

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

What information to send when asking for help

To get a quick reply, include in your message the name the order is under, the approximate date of installation and a description of the problem. Add two or three photos: one of the whole unit, one of the exact spot and, if possible, a short video of the movement that isn't working. You don't need to send any personal details beyond what is needed to locate the project. With that, the unit is identified, we decide whether guidance at a distance is enough and, where necessary, arrange a visit.

Questions

Frequently asked questions about wardrobes in Cabra

Who do I send an issue to?

Through the same channel you used to arrange the order: WhatsApp or the project e-mail. In your first message, give the name of the order and the unit affected.

What photos help to identify an adjustment?

An overall view of the wardrobe, a close-up of the part that isn't working and, if it is a door or a drawer, a short video of the movement.

Where can I find the terms of my project?

Check them in the quote document you accepted for your wardrobe in Cabra. It sets out the terms that apply to your order; this page only offers advice on use and care.

How do I know which cleaning product to use?

For almost all finishes, a soft cloth with water and, if needed, a drop of mild washing-up liquid will do. Avoid abrasives and solvents, and test any product on a discreet corner before applying it.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote