Made-to-measure wardrobes with bifold doors in Cabra

A wardrobe with bifold doors opens up a very wide section of the unit in one go, because the panels fold back on themselves and stack in a bundle against the side. We design made-to-measure wardrobes with bifold doors in Cabra and the surrounding area for anyone who needs to see and reach the inside without the doors sweeping across half the room. Here is when this system is worth it, how much space it needs in front, and how to choose the number of panels.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

How a bifold front folds away

Plan · example Floor plan · bifold
swing of a hinged door 28 cm open front 123
1Panels that fold concertina-style 2Track they run along 3Take up less room than a hinged door

A bifold front is made up of panels joined in pairs with vertical hinges. When you pull the first one, the others fold in a zigzag and stack at one end, like the pages of a book. That is why these bifold doors are sometimes called book-style doors. Each group of panels hangs from a top track and is guided by another track at the bottom or by side bearings, and that movement is what sets them apart from a classic hinged door, which swings on a single axis. The result is a folding wardrobe that frees up a good part of the opening with one short movement of the hand, without each panel having to swing through a full arc.

01

When it makes sense to open up a large part of the wardrobe

A bifold door makes the most sense when you need to see lots of shelves at a glance. A three-metre wardrobe wall with sliding doors always leaves one section covered by the overlapping panels, whereas a bifold front lets you open two thirds of the width. It is useful in bedrooms where folded clothes are stored in stacks, in utility and laundry rooms, and in narrow hallways where you want to reach your coat without stepping all the way in. On the other hand, if the unit is very low or very short, the system adds little and a simple single door is more practical. In many homes in Cabra the bedroom is not large, and there the useful question is not how far the wardrobe opens, but how many centimetres of floor are left clear in front of it.

White fitted wardrobe with open bifold doors, wooden drawers and shelves in a bright hallway in Cabra
02

Space in front of and beside the panels

This is the condition that matters most with this type of wardrobe. A folding panel needs clear space in front of the unit — less than a hinged door, but real: when opening, the bundle sticks out a few centimetres from the plane of the front, and the panels move through the air before stacking. It is best to leave a clear walkway in front, with no corner of the bed or chest of drawers pushed up against it. You also need a small margin at the sides, because the folded bundle stays at one end and takes up its own thickness. We measure that space in the spot in Cabra where the wardrobe will go before deciding which side the panels stack to.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Number, width and weight of the panels

More panels does not mean a better wardrobe. With very narrow panels the front is split into too many lines and every opening means moving several pieces; with very wide panels, the weight hangs from the hinges and calls for sturdier hardware. The usual approach is to divide the total width into panels of similar width, so that the resulting bundle is a manageable size. Height matters too: a panel that reaches the ceiling weighs more than one cut at mid-height with a top cupboard above it. These three decisions — number, width and height — determine how much effort it takes to open and close the front every day.

04

Compatibility with drawers and shelves

A bifold front works well with shelves and hanging rails, but with internal drawers you have to look at the detail. When folded, the panels leave their bundle in front of part of the opening, and that can get in the way of a drawer sitting right at that end. The usual solution is to place the drawers in the central area or on the side opposite the bundle, and keep the section next to the folds for hanging rails and fixed shelves. Drawers can also be placed outside, with their own front. Before manufacturing we draw which unit sits behind each panel so that no drawer runs into the bundle.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

Hardware, adjustments and maintenance

In a wardrobe with bifold doors, the hardware is what counts. The hinges between panels, the track carriers and the end stop work every time you open the doors, so they are chosen according to the weight of the panel and not from a catalogue. With use, the panels can drop a few millimetres and rub against each other, which is corrected with a simple adjustment of the regulating screws. It is a good idea to wipe the top track with a dry cloth now and then, where fine dust builds up, and check that the bundle closes at the same pace on both sides. Properly sized hardware shows its worth above all over the years, even in a wardrobe that is opened several times a day.

White fitted wardrobe with open bifold doors and a light wood interior in a hallway in Cabra
Measuring visit

Ask us to come and measure up in Cabra

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

How they differ from sliding and hinged doors

Compared with sliding doors, a bifold front reveals more width, though it needs some space in front. Compared with hinged doors, it needs less clearance, but it has more moving parts and its maintenance is a little more demanding. Sliding doors are the sensible choice when the space in front of the wardrobe is minimal; hinged doors, when you want full access and there is plenty of room; bifold doors sit in the middle and shine in wide openings with intermediate clearance. If you are torn between the three for your home in Cabra, the configurator lets you set up the same opening with each system and compare them using your own measurements. The hinged doors page covers the other end of the range.

07

Factors that affect the price of a bifold system in Cabra

Three things make a bifold wardrobe more or less expensive: the quality of the hardware, the number of panels and the height of the front. A system designed for light panels costs less than one built for floor-to-ceiling panels with a heavy finish, and each extra hinge adds to the cost. Finishes also have an influence, though to a lesser extent. With your measurements and an idea of the finish, our team will give you a guide price within 24 hours of receiving your configuration. The measuring visit costs €50 if you do not place an order and is free if you do, and manufacturing takes an average of 2 to 3 weeks.

Enquiry

Tell us about your project in Cabra

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Cabra

After installation: warranty and care for your wardrobe.

Does a bifold door take up space when it opens?

Yes, but less than a hinged door. The panels stack in a bundle against the side and need a clear walkway in front while they fold. If that space is taken up by the bed or a piece of furniture, it is worth reviewing the system before you decide.

How much of the shelving does the bundle of panels get in the way of when the doors are open?

You can see most of it, but not all. The folded bundle always covers a narrow strip at the end where it stacks. That is why we put the rails and shelves you use least in that area, and keep the central section for everyday items.

Can it go in front of interior drawer units?

It is possible if the layout is well planned. The drawers must sit outside the section taken up by the bundle of panels, or be fitted with their own external front. We check this on the drawing before approving manufacturing.

How many panels do you need for a three-metre front?

The total width of the opening, the height and the weight the hardware can support. The aim is to divide it into similar panels that are neither so narrow that the hinges multiply nor so wide that they strain the track.

Is a bifold wardrobe hard to maintain?

No, but it needs a little more attention than one with fixed panels. All you need to do is clean the track, check the adjustment screws from time to time, and avoid forcing the panels if they jam on an object.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote